IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
Do not use an extension cord.
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
SAVE THESE INSTRUCTIONS
INSTALLATION REQUIREMENTS
Tools and Parts
Check that you have everything necessary for correct installation. Proper installation is your responsibility.
SMART-MOUNT™ tray assembly installation
1
2
Tools needed
■Safety glasses
■
■¹⁄₄ in. nut driver
■⁷⁄₁₆ in. wrench
■Scissors
■Tape measure
■Level
■Drill
■³⁄₃₂ in. or smaller drill bit
3
4
Parts supplied
Check that all parts are included in parts package.
Air conditioner installation
|
|
|
|
|
|
| 7 |
|
| 6 |
|
|
|
|
|
|
|
|
|
|
| 5 | 8 |
| 1 | 2 | 3 | 4 |
|
|
|
1. | 1 |
|
| 5. | 2 side curtains | ||
2. | 6 | - #8 x ³⁄₈ in. | 6. | 1 top channel | |||
3. 3 - #8 x ³⁄₄ in. | 7. | 1 foam seal | |||||
4. | 3 | - #10 x ³⁄₈ in. | 8. | 2 side curtain frames | |||
5 | 6 | 7 | 8 | 9 | 10 | |
1. | 1 tray back |
|
|
| 6. | 4 flat washers |
2. | 1 tray center |
|
| 7. | 4 lock washers | |
3. | 2 tray sides |
|
|
| 8. | 4 hex nuts |
4. | 2 support legs |
|
| 9. | 4 carriage bolts | |
5. | 4 - #8 - 18 x ¹⁄₄ in. hex- |
| 10. | 2 - #10 - 12 x 1¹⁄₂ in. | ||
| head screws |
|
|
| ||
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation.
The location should provide:
■Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner.
NOTE: Do not use an extension cord.
■Free movement of air to rooms to be cooled.
■A large enough opening for the air conditioner. Installation parts are supplied for
■Adequate wall support for weight of air conditioner. Air conditioner weighs 80 lbs (36.3 kg) to 125 lbs (56.7 kg).
3
