Attach support legs
1.Determine the correct slots on the tray side from the type of exterior construction of the building.
Thin wall construction (vinyl, wood, etc.)
1
1. 1st and 2nd slots
Thick wall construction (brick)
1
1.2nd and 3rd slots
2.Insert carriage bolt up through slot on
3.Place one end of tray center over carriage bolt.
4.Then place flat washer, lock washer and hex nut.
NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.
|
| 1 |
|
| 2 |
|
| 3 |
|
| 4 |
|
| 5 |
1. | Hex nut | 4. Tray center |
2. | Lock washer | 5. Carriage bolt |
3.Flat washer
5.Insert second carriage bolt through tray side and attach other end of support leg.
NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.
1
2
3
4
1. | Hex nut | 3. | Flat washer |
2. | Lock washer | 4. | Carriage bolt |
6.Install support leg on other side.
6
