Complete Installation
1.Place
2.Use a ³⁄₃₂ in. drill bit to drill a starter hole through the hole in the bracket into the window sash.
3.Attach
1
2
1.Upper window sash
2.
4.Insert foam seal behind the top of the lower window sash and against the glass of the upper window.
1
2
1.Lower window sash
2.Foam seal
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
5.Plug into a grounded 3 prong outlet.
AIR CONDITIONER USE
Operating your air conditioner properly helps you to obtain the best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
■If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.
■Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C). The inside evaporator coil will freeze up, and the air conditioner will not operate properly.
NOTE: In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.
Starting Your Air Conditioner -
Digital Control
1.Remove clear protective film from control panel and front panel badge.
2.Press POWER to turn on air conditioner.
NOTE: When air conditioner is turned on for the first time
after it is plugged in, it will display the default settings: Cool mode, Turbo fan speed, 72°F (22°C). When it is turned on at all other times, it will display the previous settings.
3.Select mode. See “Mode.”
4.Select fan speed. See “Fan Speed.”
5.Set temperature. See “Temperature.”
10
