Set “
COPY” to “ON”. ( pg. 27, 30)
Load a cassette. ( pg. 14) Load a memory card. ( pg. 14)
Set the VIDEO/MEMORY Switch to “VIDEO”.
Load a memory card. ( pg. 14)

24 EN

ADDITIONAL FEATURES FOR D.S.C.

 

 

 

 

E-Mail Clip Recording

NOTES:

 

 

 

 

 

● Approximate maximum recording time per video clip is 3

You can make video clips in 160 x 120 pixels from real-

minutes.

● The video clip files stored with this camcorder are

time camera image or recorded video footage and store

compatible with MPEG4. Some MPEG4 files stored with

them in a memory card as files which can be

other devices cannot be played back with this camcorder.

conveniently sent via E-Mail.

 

To make video clips from real-time camera image

1

2 Set the VIDEO/MEMORY Switch to “MEMORY”.

3 Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.

4 Press E-MAILto engage the

 

Remaining time

E-Mail Clip Record-Standby mode.

 

E-CLIP

0h5m

● “E-CLIP” appears.

16 0

 

 

00 : 00

5STANDBY

Press the Recording Start/Stop

Button to start recording.

6 Press the Recording Start/Stop Button to stop recording.

●“COMPLETED” is displayed, then

the camcorder re-enters the E-Mail Clip Record-Standby mode.

7 Press E-MAILto end E-Mail Clip Recording.

Approximate recording time

MultiMediaCard

SD Memory Card

 

 

 

 

8 MB**

8 min.

8 MB*

7 min.

 

 

 

 

16 MB*

17 min.

16 MB*

15 min.

 

 

 

 

32 MB*

34 min.

32 MB*

33 min.

 

 

 

 

*Optional

**Provided

To make video clips from recorded video footage

1 Load a cassette. ( pg. 14)

2 Load a memory card. ( pg. 14)

3 Set the VIDEO/MEMORY Switch to “VIDEO”.

4 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

5 Press 4/9 to start video playback.

6 Press E-MAILto engage the E-Mail Clip Record- Standby mode.

●“E-CLIP” appears.

●To cancel E-Mail Clip Recording, press E-MAILagain or press 8 to stop video playback.

7 At the point you want to start dubbing, press the Recording Start/Stop Button to start E-Mail Clip Recording.

8 Press the Recording Start/Stop Button to stop E-Mail Clip Recording.

●“COMPLETED” is displayed, then the camcorder re-enters the E-Mail Clip Record-Standby mode.

Dubbing Still Images Recorded On A Tape To A Memory Card

Still images can be dubbed from a tape to a memory card.

1

2

3

4 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

5

6 Press 4/9 to start playback.

7 At the point you want to dub, press 4/9 again to engage Still Playback.

8 To dub the image, press SNAPSHOT.

●The “ ” indication appears during dubbing.

NOTES:

●To use Playback Special effects with a video image you wish to dub, perform up to step 8 using the remote control (provided). ( pg. 20)

●Images are dubbed in 640 x 480 pixels.

Resetting The File Name

By resetting the file name, a new folder will be made. The new files you are going to make will be stored in the new folder. It is convenient to separate the new files from previously made files. (Available only for Image and video clip files.)

1 To reset the file name...

...for images, display its playback screen. ( pg. 22)

...for video clips, display its playback screen. ( pg. 22) 2 Press MENU. The Menu Screen appears.

3 Press or to select “NO. RESET”, and press SET. The NO. RESET screen appears.

4 Press or to select “EXECUTE”, and press SET. The new folder (such as “101JVCGR”) will be made and the file name of the next shot starts from DVC00001.

NOTE:

If the file name reaches DVC09999, a new folder (such as

“101JVCGR”) will be made and the file name will start again from DVC00001.

9 Press E-MAILto end E-Mail Clip Recording.