JVC GR-DX78 Initialising A Memory Card, Setting Print Information (DPOF Setting), To Print All Still Images (One Print For Each), To Reset The Number Of Prints

26 EN ADDITIONAL FEATURES FOR D.S.C.

Setting Print Information (DPOF Setting)

This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing. You can select one of the 2 print information settings for images stored in the memory card: “To Print All Still Images (One Print For Each)” or “To Print By Selecting Still Images And Number Of Prints”.

NOTES:

●If you load a memory card already set as shown below in a printer compatible with DPOF, it will make prints of the selected still images automatically.

●To print images recorded on a tape, first dub them to a memory card. (
pg. 24)

To Print All Still Images (One Print For Each)

1 Display the playback screen of normal images (
pg. 22).

2 Press MENU. The Menu Screen appears.

3 Press	or	to select
“DPOF”, and press SET. The Sub				MENU
Menu appears.			DPOF		CURRENT
4 Press	or	to select “ALL 1”,			ALL 1
					RESET
and press SET. The DPOF screen					RETURN
appears.
5 Press	or	to select

“EXECUTE”, and press SET. The	DPOF
normal playback screen appears.
● To cancel selection, select	ALL 1 ?
“RETURN”.
	EXECUTE
	RETURN

To Print By Selecting Still Images And Number Of Prints

1 Perform steps 1 – 3 in “To Print All Still Images (One Print For Each)”.

2 Press or to select	DPOF
“CURRENT”, and press SET. The

6 Press or to select

“RETURN”, and press SET. The	DPOF
“SAVE?” appears.
● If you did not change any settings in	SAVE?
step 3 through 5, the Menu Screen
	EXECUTE
reappears.	CANCEL

7 Press or to select

“EXECUTE” to save the setting you have just made, and press SET.

●To cancel selection, select “CANCEL”.

To Reset The Number Of Prints

1 Perform steps 1 – 3 in “To Print All Still Images (One Print For Each)”.

2 Press or to select “RESET”, and press SET. The DPOF screen appears.

3 Press or to select “EXECUTE”, and press SET. The normal playback screen appears.

●To cancel selection, select “RETURN”.

●The number of prints is reset to 0 for all still images.

CAUTION:

While performing the above, never disconnect power, as this may cause the memory card to be corrupted.

Initialising A Memory Card

You can initialise a memory card any time.

After initialising, all files and data stored in the memory card, including those which have been protected, are cleared.

1 Set the VIDEO/MEMORY Switch to “MEMORY”.

2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

3 Press MENU. The Menu Screen appears.

4 Press or to select	FORMAT
“FORMAT”, and press SET. The	ERASE ALL
FORMAT screen appears.
	EX I ST I NG DATA?

5 Press or to select

“EXECUTE”, and press SET. TheEXECUTE

DPOF screen appears.

memory card is initialised.

RETURN

3 Press	or	to select the	SHEETS
desired file.			0 0
4 Press			RETURN
	or	to select the
number indication (00), and press SET.
5 Select the number of prints by			DPOF
pressing	to increase the
number, or		to decrease the
number, and press SET.			SHEETS
● Repeat steps 3 through 5 for the
				0 5
desired number of prints.

●The number of prints can be set up to 15.

●To correct the number of prints, select the image again and change the number.

●When initialisation is finished, “NO

IMAGES STORED” or “NO E-MAIL CLIP STORED” appears.

●To cancel initialisation, select “RETURN”.

CAUTION:

Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialisation. If the memory card becomes corrupted, initialise it.