52 EN
INDEXIndications
1Cassette Warning/
Tape Remaining Time.......................... Z pg. 13
When no cassette is inserted: the cassette ( )
warning blinks.
When the Erase Protection tab is not in the position
that allows recording: the cassette ( ) warning
lights. Otherwise, the tape remaining time is
displayed and the tape remaining time warning
blinks when the tape is about to reach its end.
When the Power Switch is set to “PLAY” and a
tape is loaded: the cassette ( ) mark is
displayed regardless of the Erase Protection tab’s
position.
2,6 Programme AE Indicator ................. Z pg. 20
Displayed at 2 for approx. 2 seconds when
Programme AE with special effects is switched
from one mode to another by pressing P.AE., then
only the indicator remains at 6.
2,7 Fade/Wipe-Standby Indicator.......... Z pg. 19
Displayed at 2 for approx. 2 seconds when the
Fade/Wipe is switched from one effect to another
by pressing EFFECT, then only the indicator
remains at 7.
3Tape Length Indicator............................ Z pg. 8
4Zoom Indicator Bar ............................. Z pg. 14
Zoom Level Indicator
Approximate Zoom Ratio
5Recording Indicator............................. Z pg. 12
8Picture Stabilizer Indicator................... Z pg. 16
9•Interval Timer/Recording Time
Indicator..................................... Z pg. 32, 41
•5 Sec. Rec Mode Indicator ................ Z pg. 17
0Instant Title Display............................. Z pg. 23
!Date/Time Display............................... Z pg. 22
@Battery Pack Remaining Power Indicator
Changes as follows according to the battery
pack’s remaining power level:
“”. When the power is
almost gone, the indicator “ ” blinks (battery
power warning), then the unit shuts off. Replace
the battery pack with a fully charged one.
Note: The symbol containing 3 darkened squares —
— does not necessarily mean that the battery
pack is fully charged.
#Focus Indicator.................................... Z pg. 29
$Exposure Control Level Counter........... Z pg. 27
%White Balance Mode Indicator ............ Z pg. 30
^•Record–Standby Mode Indicator ....... Z pg. 12
•Lens Cover Warning:
LENS COVER.................................... Z pg. 13
&Clock Battery Warning
Blinks for approx. 10 seconds when the power is
turned on. This display also blinks when the clock
(lithium) battery is either not installed or has
discharged. Install or replace the old battery with
a new one (Z pg. 6).
*•Tape End Display: TAPE END............ Z pg. 13
Appears when the end of the tape is reached
during playback, recording or fast-forward.
•Condensation Warning:
When this indication appears, all functions
except tape eject and power on/off are disabled.
Turn the unit off (without removing the power
source) for a few hours, and when you turn it on
again the indication should disappear.
•Head Clog Warning:
Appears if dirty heads are detected during
recording. In such a case, use the optional
Cleaning Cassette. If, after using it, the problems
still exist, consult your nearest JVC dealer.