JVC GR-FX101 specifications Access Focus Menu, Access Manual Focus, END Adjustment of Focus

Select Dial

Display

FOCUS AUTO

EXPOSURE AUTO

WIDEOFF

S.LXMAX TITLE

DATETIME DISP.

4RETURN

FOCUS

AUTO

MANU

EXIT

Power Switch

Menu Screen

FOCUS Menu

Manual Focus Screen

EN29

MANUAL FOCUS

NOTE:

You should already have made the necessary viewfinder adjustments (
pg. 12). If you haven’t, do so before continuing.

1 SELECT OPERATION MODE Set the Power Switch to “PRO.”.

2 ACCESS MENU SCREEN

Press the Select Dial to display the Menu Screen.

3 ACCESS “FOCUS” MENU

Move the highlight bar to “FOCUS” by rotating the Select Dial, then press it.

4 ACCESS MANUAL FOCUS

Rotate the Select Dial to move the highlight bar to “MANU”, then press it. “” and “” appear. The focus is locked at this point.

5 ADJUST FOCUS To farther subject . . .

.... rotate the Select Dial upward. “” appears and

blinks.

Go to step 6.

To nearer subject . . .

.... rotate the Select Dial downward. “” appears

and blinks. Go to step 6.

6 END ADJUSTMENT OF FOCUS

Press the Select Dial. The Menu Screen reappears with the highlight bar on “RETURN”.

7 CLOSE MENU SCREEN

Press the Select Dial. The Menu Screen disppears and “ ” reappears to indicate the focus is locked.

NOTES:

●To return to Auto Focus, select “AUTO” in step 4.

●To re-adjust Manual Focus, repeat the procedure from step 2.

●Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a certain subject in the wide-angle position, sharply focused images cannot be obtained when zoomed in because the depth-of-field is reduced at longer focal lengths.

●When the focus level cannot be adjusted any farther or closer, “” or “” will blink.