EN19
FEATURE:
Quick Review
PURPOSE:
To check the end of the last recording.
OPERATION:
1)Set the Power Switch to “CAMERA” (“AUTO” or
“PRO.”).
2)Press
2
and release quickly during the Record–
Standby mode.
nTape is rewound for approx. 2 seconds and played
back automatically, then pauses in Record–Standby
mode for the next shot.
NOTE:

Distortion may occur at the start of playback. This is

normal.

FEATURE:
Retake
PURPOSE:
To re-record certain segments.
OPERATION:
1)Make sure the camcorder is in the Record–Standby
mode.
2)Press and hold either RETAKE to reach the start point
for new recording. Pressing
3
forwards the tape
and pressing
2
reverses it.
3)Press the Recording Start/Stop Button to start
recording.
NOTE:

Noise bars appear and pictures may become

monochrome or darken during Retake. This is normal.

RETAKE
(
2
/
3
)
Button