EN37

Transmitted beam effective area

Remote sensor

When using the remote control, be sure to point it at the remote sensor. The illustration shows the approximate transmitted beam effective area for indoor use.

The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.

Interval time indicator

1M I N

1 / 2 S

Recording time indicator

Remote sensor

FEATURE: Animation and Time-Lapse

PURPOSE:

The remote control lets you set/release Interval Time and Recording Time without using the Menu Screen.

OPERATION:

Animation

1)Set

Instead of performing steps 1 and 2 on pg. 27 (“Animation”), press REC TIME on the remote control. Each time REC TIME is pressed, the Recording Time indicator appears, changing in the following order: 1/4S, 1/2S, 1S, 5S and no indication (off).

2)Release

Instead of using the Menu in step 5 on pg. 27, press REC TIME on the remote control until the Recording Time indicator disappears.

Time-Lapse

1)Set

Instead of performing steps 1 through 3 on pg. 27 (“Time-Lapse”), press INT. TIME and REC TIME on the remote control. Each time INT. TIME is pressed, the Interval Time indicator appears, changing in the following order: 15S, 30S, 1MIN, 5MIN and no indication (off). Each time REC TIME is pressed, the Recording Time indicator appears, changing in the following order: 1/4S, 1/2S, 1S, 5S and no indication (off).

2)Release

Instead of using the Menu in step 5 on pg. 27, press INT. TIME and REC TIME on the remote control until the indicators disappear.

NOTE:

Also refer to page 27.

START/STOP

INT. TIME

REC. TIME

RM-V700U

(optional)

Page 37
Image 37
JVC GR-SX850 specifications Feature Animation and Time-Lapse, Set, Release