30 EN

Stop (5) Button

Rewind (2) Button

Play/Pause (4/6) Button

Fast-Forward (3) Button

Set to “ ”.

PLAYBACK Basic Playback1 Load a tape ( pg. 13).
Set the Power Switch to “

”.

2 To start playback, press 4/6.

 

•To stop playback, press 5.

 

•Press 2to rewind, or 3to fast-forward the tape during Stop mode.

NOTES:

●The camcorder shuts off automatically after about5 minutes in Stop mode. To turn on again, set the PowerSwitch to “OFF”, then to “”.

●The playback picture can be viewed in the viewfinder or on a connected TV ( pg. 32, 33).

●If a blank portion on the tape is played back, the screen may become black. This is not a malfunction.

Still Playback: Pauses during playback.1)Press 4/6during playback.2)To resume normal playback, press 4/6again.

●Noise bars will appear and the picture will become monochrome during Still Playback.

Shuttle Search: Allows high-speed search in either direction.1)Press 3for forward or 2for reverse search during playback.2)To resume normal playback, press 4/6.

●During playback, press and hold 2or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●Noise bars appear and pictures may become mono- chrome or darken during Shuttle Search. This is normal.