Separate the Velcro strip.
Pass your right hand through the loop and grasp the grip.
8 EN
Power Zoom
Lever
Recording
Start/Stop
Button
GETTING STARTED (cont.)
Grip Adjustment
1
2
3 Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Lever. Refasten the Velcro strip.
3
2 | Viewfinder Adjustment |
1 Set the Power Switch to “ ” or “ ”.12 Adjust the viewfinder manually for best viewability.
| P | 3 | Turn the Diopter Adjustment Control until the |
| A |
| |
| M |
|
|
| FF |
| indications in the viewfinder are clearly focused. |
| A |
| |
| O |
|
|
| Y |
|
|
| L |
|
|
| Set to “ | ” or |
|
| “ ”. |
|
|
PAUSE |
| Shoulder Strap Attachment | |
|
|
| Following the illustration, thread the strap through the |
|
| 1 eyelet 1, then fold it back and thread it through the | |
|
|
| buckle 2. Repeat the procedure to attach the other |
2 |
|
| end of the strap to the other eyelet 3, making sure |
1 |
| the strap is not twisted. | |
| 2 Adjust as shown in the illustration 4. | ||
|
| ||
43
Tripod Mounting
1 Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to Stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a