6EN

SUPPLY POWER

QUICKOPERATIONGUIDE

INSERTING A VIDEO

CASSETTE

AHook on.

B Push in.

PUSH Button

EJECT Switch

BATTERY RELEASE

Using the battery pack

Hook its end to the camcorder and push the battery pack in until it locks in place . (Charging procedure, pg. 8)

To remove the battery pack

Slide BATTERY RELEASE and pull out the battery pack.

1Open the LCD monitor fully.

2Slide EJECT to open the cassette holder.

3 Insert a video cassette.

4 Press PUSH to close the cassette holder. (For more details, pg. 13)

PLAYBACK

2Rewind (2) Button

3ButtonPlay/Pause (4/6)

Stop (5) Button

1 Set to

 

“PLAY”.

1Set the Power Switch to “PLAY”.

2 Press 2.

The tape will automatically stop at the beginning of the tape.

3Press 4/6.

Playback starts and the playback picture appears.

•To stop playback, press 5. (For more details, pg. 35.)

The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.

The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.

Or simply play back the tape on a VHS VCR

using the Cassette Adapter (VHS Playpak). pg. 37

SHOOTING

1

LENS COVER

Open/Close Ring

2

Set to “AUTO” or “PRO.”.

3Recording Start/Stop Button

1 Turn the LENS COVER Open/Close Ring to open the lens cover.

2Set the Power Switch to “AUTO” or “PRO.”.

The power lamp will light and an image will appear.

3Press the Recording Start/Stop Button.

— Recording starts.

•To stop recording temporarily, momentarily press the Recording Start/Stop Button once again.

(For more details, pgs. 18, 19)

The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.

The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.

Page 6
Image 6
JVC GR-SXM337UM, GR-SXM737UM specifications Using the battery pack, To remove the battery pack