18EN

VIDEO RECORDING

REFRESH Button

Makes the DSC lamp go out.

During shooting

Power Switch

Recording Start/Stop Button

2 5M I N

Tape remaining

 

 

time indicator

 

 

(Approximate)

 

 

 

MIN

 

120MIN

 

119MIN

 

 

(Now calculating)

0MIN 1MIN 2MIN 3MIN

(Blinking) (Blinking) (Blinking)

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

Power (  pg. 8)

Load A Cassette (  pg. 15)

Recording Mode Setting (  pg. 14)

Tape Length Setting (  pg. 14)

Grip Adjustment (  pg. 10)

Viewfinder Adjustment (  pg. 10)

Shooting While Watching The Viewfinder

1 Make sure the LCD monitor is closed and locked. Press in the tabs on the lens cap to remove it. Set the Power Switch to “” or “ ”. If the DSC Lamp is lit, press REFRESH for approx. 1 second to select “VIDEO”. The VIDEO Lamp lights and the camcorder enters the Record-Standby mode. “PAUSE” is displayed in the viewfinder.

2 Press the Recording Start/Stop Button. “” appears

in the viewfinder while recording is in progress.

To Stop Recording . . .

.... press the Recording Start/Stop Button. The camcorder

re-enters the Record-Standby mode.

Shooting While Watching The

LCD Monitor

180°

BRIGHT Wheel

90°

1 Make sure the LCD monitor is fully open. Press in the tabs on the lens cap to remove it. Set the Power Switch to “” or “ ”. If the DSC Lamp is lit, press REFRESH for approx. 1 second to select “VIDEO”. The VIDEO Lamp lights and the camcorder enters the Record-Standby mode. “PAUSE” is displayed in the LCD monitor.

BR I GHT – – – – – – 6 – – +

To Adjust The Brightness Of The LCD Monitor

.... rotate the BRIGHT Wheel until the bright

level indicator on the display moves and the appropriate brightness is reached.

2 Tilt the LCD monitor upward/downward for best viewability and press the Recording Start/Stop Button. “” appears in the LCD monitor while recording is in progress.

NOTE:

When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this happens, use the viewfinder instead.

To Stop Recording . . .

.... press the Recording Start/Stop Button. The camcorder

re-enters the Record-Standby mode.

Power Switch Position

:Suitable for standard recording using NO special effects or manual adjustments.

: Allows you to set recording functions using the menus for more creative capabilities. OFF : Switches off the camcorder.

: Allows you to play back your recordings.

Page 18
Image 18
JVC GR-SXM530 18EN, Shooting While Watching LCD Monitor, To Stop Recording, Rotate the Bright Wheel until the bright