34EN
Makes the DSC lamp come on.
To DIGITAL
connector Open the cover.
PC connection cable*
For Windows®: To COM Port
D.S.C. PLAYBACK (cont.)
Connection To A Windows® PC
Image data stored in the camcorder’s
( pg. 53).
To assure safety, make sure all units are turned off before making any connection.
1
2 Set the Power Switch to “ 
”. The VIDEO Lamp comes on. If the DSC Lamp is not lit, press REFRESH for approx. 1 second to select “DSC”. A still image stored in memory appears.
•When transferring still images to a computer, be sure that a still image is displayed on the screen.
3 Launch the software* on your Windows® PC. Transfer the still images stored in the camcorder’s memory to the Windows® PC. Refer to the software’s instruction manual on the
•During transfer of the still image, the camcorder’s
screen becomes blue and “ 
” is displayed. After transferring is finished, the screen displays the same still image as in step 2.
4 Close the software*, then switch off the camcorder.
*Provided with
NOTES:
●Before transferring still images from your personal computer to the camcorder’s
●When transferring still images from your personal computer to the camcorder, make sure the number of images to be transferred is smaller than the camcorder’s remaining number of shots available.
●Use the AC Adapter as the power supply instead of the battery pack.
●The still images stored in the camcorder’s memory are not automatically removed after being transferred to the PC. If you wish to remove those still images from the camcorder’s memory, delete them ( pg. 33).
●Windows® are trademarks of Microsoft Corporation, registered in the U.S.A. and other countries.
