14 EN

LENS COVER Open/Close Ring

System Select

Switch

 

 

Power Switch

 

 

Recording Start/Stop Button

2 5M

I N

Tape remaining time

 

 

indicator

 

 

(Approximate)

 

 

 

MIN 120MIN 119MIN

(Now calculating)

0MIN 1MIN 2MIN 3MIN

(Blinking) (Blinking) (Blinking)

180° 90°

Select Wheel (BRIGHT)

DISPLAY Button

BASIC VIDEO RECORDING

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

Power (  pg. 6)

Load A Cassette (  pg. 8)

Recording Mode Setting (  pg. 10)

Tape Length Setting (  pg. 10)

Grip Adjustment (  pg. 13)

Viewfinder Adjustment (  pg. 13)

Shooting While Watching The Viewfinder

1 Make sure the LCD monitor is closed and locked. Turn the LENS COVER Open/Close Ring to open the lens cover. Set the System Select Switch to “VIDEO”, then set the Power Switch to “CAMERA” (“AUTO” or “PRO.”). The power lamp lights and the camcorder enters the Record-Standby mode. “PAUSE” is displayed in the viewfinder.

2 Press the Recording Start/Stop Button. “” appears

in the viewfinder while recording is in progress.

Shooting While Watching The LCD Monitor

1 Make sure the LCD monitor is fully open. Turn the LENS COVER Open/Close Ring to open the lens cover. Set the System Select Switch to “VIDEO”, then set the Power Switch to “CAMERA” (“AUTO” or “PRO.”). The power lamp lights and the camcorder enters the Record-Standby mode. “PAUSE” is displayed in the LCD monitor.

2 Tilt the LCD monitor upward/downward for best viewability and press the Recording Start/Stop Button. “” appears in the LCD monitor while recording is in progress.

BR I GHT – – – – 6 – – – – +

To Adjust The Brightness Of The LCD Monitor

.... rotate the Select Wheel (BRIGHT) until the

bright level indicator on the display moves and the appropriate brightness is reached.

NOTE:

When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this happens, use the viewfinder instead.

To Stop Recording . . .

.... press the Recording Start/Stop Button. The camcorder

re-enters the Record-Standby mode.

Power Switch Position

AUTO : Suitable for standard recording using NO special effects or manual adjustments.

PRO.

: Allows you to set recording functions using the menus for more creative capabilities.

OFF

: Switches off the camcorder.

PLAY

: Allows you to play back your recordings.

Page 14
Image 14
JVC GR-SXM760A 14 EN, Shooting While Watching The Viewfinder, Shooting While Watching The LCD Monitor, To Stop Recording