D.S.C. PLAYBACK Connection | EN41 |
Connection To A Windows® PC |
|
Set to
“D.S.C.”.
PC connection cable (provided)
To DIGITAL connector
For Windows®: To COM Port
Image data stored in the camcorder’s
To assure safety, make sure all units are turned off before making any connection.
1
2 Set the System Select Switch to “D.S.C.”, then set the Power Switch to “PLAY”. A still image stored in memory appears.
•When transferring still images to a computer, be sure that a still image is displayed on the screen.
3 Launch the provided software on your Windows® PC. Transfer the still images stored in the camcorder’s memory to the Windows® PC. Refer to the software’s instruction manual on the provided
•During transfer of the still image, the camcorder’s
screen becomes blue and “ 
” is dis- played. After transferring is finished, the screen displays the same still image as in step 2.
4 Close the software, then switch off the camcorder.
NOTES:
●Before transferring still images from your personal computer to the camcorder’s
●When transferring still images from your personal computer to the camcorder, make sure the number of images to be transferred is smaller than the camcorder's remaining number of shots available.
●Use the AC Power Adapter/Charger as the power supply instead of the battery pack.
●The still images stored in the camcorder’s memory are not automatically removed after being transferred to the PC. If you wish to remove those still images from the camcorder's memory, delete them ( pg. 46, 47).
●Windows® are trademarks of Microsoft Corporation, registered in the U.S.A. and other countries.
