JVC GR-SXM920 specifications EN51, Case of Select

In case of “SELECT”

N E X T < DELETE >
01	02
04	05	06

If you check the remaining still images on INDEX Menu after deleting . . .

E X I T	<INDEX>
01	02	03
04	05	06

EN51

6 Rotate the Select Wheel to move the highlight bar to “CANCEL” or “ENTER”, then press it.

•“CANCEL” does not delete the selected still images and the screen returns to the Menu Screen.

•“ENTER” deletes the selected still images. While “ENTER” blinks, they are in the process of being deleted from memory. After deleting is finished, the screen returns to the Menu Screen.

7 Press the Select Wheel again to exit the Menu Screen.

CAUTION:

While “ENTER” is selected on the Delete Execute Menu and it is blinking, switching off the camcorder or removing the power supply unit (battery pack or AC Power Adapter/Charger) may cause the camcorder’s built-in memory to become corrupt. Never remove the power supply unit at this stage.

NOTES:

●Before deleting some still images stored in memory, perform “Protect” for the necessary ones (☞ pg. 49) or

save them on a PC so that you do not lose them accidentally (☞ pg. 45).

●Even if “ALL” is selected on the Delete Menu, it is not possible to delete a still image with a padlock mark. “ALL” only deletes all still images that are not protected. After images are deleted from memory, the remaining images are automatically moved up to fill in any gaps in the numerical sequence. The Index No. for images protected (with the padlock mark) may therefore change.

●When selecting the desired still image in step 5, to move the frame from No. 7 to 6, place the highlight bar on “EXIT” by rotating the Select Wheel upward. Rotate it further upward to move the frame to No. 6. Perform the same procedure for still images that follow the 13th one.

●On the Delete Select Menu, a star mark is displayed next to a still image you shot in the FINE mode.

●If the remaining number of shots is not 30 in the FINE mode or 60 in the STANDARD mode when “ALL” is

selected on the DELETE Menu, initialize the camcorder’s memory (☞ pg. 59).