EN 23
Print Operations
MENU MEMORY PRINT
SELECT SET
MENU MEMORY PRINT
SELECT SET
5 SET THE VIDEO SOURCE TO PLAY- BACK MODE
•For details, refer to the instruction manual supplied with the video source.
6 PRESS THE MEMORY BUTTON WHEN THE IMAGE YOU WISH TO PRINT APPEARS
•This action stores the image you wish to print. •The message, “Please wait ...” is displayed on the LCD panel while the image is being stored. The message, “Store in memory” is displayed when the image has been stored.
•The memory icon 
indicates the following conditions.
on: image data has been stored in the printer
off: no image data is stored in the printer
7 | PRESS THE PRINT BUTTON | |
•The printer starts printing the stored image. | ||
| •The message, “Please wait ...” is displayed | |
| on the LCD. | appears. |
| Then the printer icon | |
| •The printer icon | indicates the |
following conditions.
on: image data is being printed
off: printing has been completed •When printing is completed, the message,
“Remove paper” is displayed on the LCD panel.
Do not touch the printer or printing paper until this message is displayed.
NOTES:
•To print the same image again, press the PRINT button. One print is made each time the PRINT button is pressed.
•To print a different image, perform operations in steps 5 to 7.
•To store the picture again before printing, switch menu item “monitor” from “memo. pic” to “input pic.”
•Do not touch the printer or the paper during printing
During printing paper will come out of the paper out/manual feed slot; do not touch the paper until printing stops to prevent paper jams.
Do not open the paper compartment door or the ink cassette compartment lid during printing. When the printer is battery powered, do not open the battery compartment door. If opened, printing stops and the power is automatically turned off. When the printer is powered up again, the paper that was being printed when printing stopped is ejected.
