Connecting a USB Mass storage class device
You can connect a USB mass storage class device such as a USB flash memory, hard disk drive, multimedia card reader, digital camera, etc. to this System.
USB cable (not supplied)
Main unit
•You cannot connect a personal computer to the (USB MEMORY) terminal of the System.
•When connecting with a USB cable, use the USB 2.0 cable whose length is less than 1 m (3.3 ft).
Preparing the Remote Control
Insert the batteries into the remote control by matching the polarity (+ and
When using the remote control, point the top of the remote control toward the remote sensor as directly as possible. If you operate it from a diagonal position, the operating range (approx. 5 m/16.4 ft) may be shorter.
•If the range of effectiveness of the remote control decreases, replace both batteries.
Caution:
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Canceling the Demonstration
Main Unit
ONLY
2sec.
DEMO OFF
DEMO START
To start the demonstration, select DEMO START.
Changing the Color System | Remote | INFO |
ONLY |
You can select the video output to match it to the color system of your TV (NTSC or PAL).
• You can change the setting only while playback is stopped.
1 Enter the color system setting mode.
2sec.
2 Select the color system.
3 Store the setting.
6