Playing Back a Disc/USB Mass Storage
Class Device | INFO |
•
IMPORTANT: Before playing a disc/USB mass
storage class device, make sure of the following...
•Turn on the TV and select an appropriate input mode on the TV to view the pictures or
•For disc/USB mass storage class device playback, you can change the initial setting to your preference. See
“Setup Menu Operations” on page 37.
If “” appears on the TV screen when you press a
button, the disc/USB mass storage class device cannot perform the operation you have tried to do.
•For playback of AV files, see also “Operations Using the Control Screen” on page 27.
To insert discs
•When using an 8 cm
To close the disc tray, press the same 0 button again.
•If you press # for the same tray, the disc tray closes and playback starts automatically.
To connect a USB mass storage class device
USB cable (not supplied)
•Always set the volume to the minimum level when connecting or disconnecting the USB mass storage class device.
•To disconnect the USB mass storage class device safely, turn off the System before disconnecting the device.
To play back disc/USB mass storage class device
To start:
Disc | USB mass storage class device |
Playback starts.
To pause: | To stop: |
|
|
To release it, press
DVD/CD 3 or
USB MEMORY 3.
While playing, this System can store the stop point (not applicable for CD). When you start playback again by pressing DVD/CD 3 or USB MEMORY 3, it starts from the position where you have
To stop completely while Resume is activated, press 7 twice. (To cancel Resume, see “RESUME” on page 38.)
On-screen guide icons
•During playback, the following icons may appear for a while on the TV screen:
Appears at the beginning of a scene containing
Appears at the beginning of a scene containing
Appears at the beginning of a scene containing
•The following icons will also be shown on the TV screen
to indicate your current operation.
, , , , ,
•To deactivate the
10