Adjusting the Volume
To preset stations
Remote
ONLY
The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX).
Remote control: | Main unit: | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To drop the volume in a moment | Remote |
ONLY |
To restore the volume, press again or adjust the volume level.
(while holding...)
You can preset 30 FM and 15 AM stations.
1Tune in to a station you want to preset.
•You can also store the monaural reception mode for FM preset stations if selected.
2Activate the preset number entry mode.
•Finish the following process while the indication on the display is flashing.
•To cancel the operation during procedure, press CANCEL while holding SHIFT.
3Select a preset number for the station you store.
•To select a number, see “How to select a number” on page 8.
• You can also use ¢/4 buttons.
Listening to the Radio | INFO |
To select the band (FM/AM)
TUNER FM 
TUNER AM
AUX
To tune in to a station
While FM or AM is selected...
1sec.
Increases the frequency.
Decreases the frequency.
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops.
•When you repeatedly press the button, the frequency changes step by step.
To manually stop the searching, press either button.
4Store the station.
To tune in to a preset station
1Select the band (FM or AM).
TUNER FM 
TUNER AM
AUX
2Select the preset number for the station you stored.
•To select a number, see “How to select a number” on page 8.
• You can also use ¢/4 buttons.
If the FM reception is poor
Remote
ONLY
The MONO indicator lights on the display. Reception will improve though stereo effect is
To restore the stereo effect, press the button again (the MONO indicator goes off).
9