Component Names and Functions

Using the remote control

After plugging the main unit into an AC wall outlet, press the power [ ] key on the remote control unit to turn the system on.

After the system powers up, press the key for the function you want to use. Point the remote control at the remote sensor when using it.

•The remote control may not operate correctly if direct sunlight or light from a high-frequency fluorescent lamp (such as an inverter type) is shining on the remote sensor. If this happens, move the system to a different location to avoid this type of malfunction.

Approx.

6 m

(19.68 ft.)

Approx. Approx.

30° 30°

Loading the remote control batteries
1Remove the

2Load the AAA-size batteries

battery cover.

supplied with the system.

• Check the polarity of the batteries (UV) when loading them.

3Close the battery cover.

•If the range or effectiveness of the remote control decreases, replace both batteries.

•The batteries supplied with the system are for operational testing and may last only for a short time.

•When replacing the batteries, always load 2 new batteries.

 

Do not leave the battery near fire or under direct sunlight. A fire, explosion

CAUTION

or excessive heat generation may result.

 

15