Installing the System

Notes on installing the system

•Always install the system on a flat, stable surface. When installing the system on a stand of some sort, be sure to check the strength of the stand.

•The magnets used in the speakers may cause color irregularities on TV or PC screens. Do not set up the speakers too close to a TV or PC.

 

Left speaker

Main unit

Right speaker

 

 

 

 

 

CAUTION

 

Observe the following cautions when installing the system. Insufficient heat

 

 

radiation may build up internal heat and cause a malfunction or fire hazard.

•Do not place any object on the system that may hinder heat radiation.

•Do not place the system upside-down or lay it on its side.

•Do not cover the system with a cloth or place it on a carpet or blanket.

•Do not place the system in a narrow space that hinders the ventilation.

•Leave the spaces specified below around the cabinets of the main unit.

Top panel:

50 cm (19-11/16 in.) or more

Side panel:

10 cm (3-15/16 in.) or more

Back panel:

10 cm (3-15/16 in.) or more

Install the system so the power outlet is easily accessible, and unplug the power cord from the power outlet immediately in case of any trouble.

Note that the power supply to the system is not shut down completely by simply setting the power switch to OFF.

To shut down the power supply completely, unplug the power cord.

Getting the best acoustic effect

The sound will vary depending on the positioning of the speakers. To get the best possible sound quality, note the guidelines below.

•Ensure that the areas around the left and right speakers are as identical as possible. Set up the left and right speakers away from the wall and hang thick curtains on any windows to minimize echoes or reverberation.

•Place the left and right speakers as far apart as possible.

•Position the speakers at the same height as your ears when you are using the system.

7