Changing the Menu Settings (Continued)

 

Y BASIC SETTINGS menus

 

 

Settings: [ ] = Factory-preset

1 CLEAN-UP HDD

Connect the AC adapter.

YES: Performs this function. Select [OK] when completed.

Writing speed to HDD tends to

[NO]: Cancels this function.

become slow after long periods

of repeated use. Execute cleanup

 

NOTE

 

periodically to regain the writing

Depending on the condition of the HDD, it may take several

speed.

minutes for the cleanup process to be completed.

 

 

 

 

[FILE]: Initializes all files in the hard disk drive.

2 FORMAT HDD

FILE + MANAGEMENT NO: Initializes all files and

Ensures stable speeds and

 

management numbers in the hard disk drive. (Z p. 64)

operation when accessing the hard

 

NOTE

 

disk drive.

Be aware that all files and data including protected files will be

 

 

 

 

erased by the formatting process.

, FORMAT SD CARD

[FILE]: Initializes all files in the microSD card.

You have to format newly purchased

FILE + MANAGEMENT NO: Initializes all files and

microSD cards with this camera

 

management numbers in the microSD card. (Z p. 64)

before using them.

 

 

 

 

NOTE

 

This will also ensure stable speeds

 

 

Be aware that all files and data including protected files will be

and operation when accessing the

microSD card.

erased by the formatting process.

 

 

Connect the AC adapter.

0 DELETE DATA ON HDD

YES: Performs this function. Select [OK] when completed.

[NO]: Cancels this function.

When you dispose of the camera,

 

 

 

 

NOTE

 

perform this to make it difficult to

 

 

In addition to this operation, it is recommended that you use a

recover data on the HDD.

 

 

commercially available data erasing software to eliminate the

 

 

risk of data recovery.

-

VIDEO NO. RESET*

 

 

 

.

IMAGE NO. RESET

 

 

 

By resetting the file number (name),

YES: Performs this function. Select [OK] when completed.

a new folder is made. The new files

will be stored in the new folder.

[NO]: Cancels this function.

It is convenient to separate the new

 

 

 

files from previously recorded files.

 

 

 

* MPEG-2 TS format only

 

 

 

] REMOTE

OFF: The camera does not receive the signal from the

Turns on/off reception of the

 

remote control.

operation signal from the remote

 

[ON]: Enables operation with the remote control.

control.

 

 

 

\ OPERATION SOUND

OFF: Turns off the operation sound.

Turns on/off the operation sound.

[ON]: The melody sounds when operations are performed.

56EN