Other problems
The lamp does not flash
during battery pack
charging.
0Check the remaining battery power.
(When the battery pack is fully charged,
the lamp does not flash.)
14
0When charging in either a hot or cold
environment, ensure that battery is being
charged within the permitted temperature
range. (Otherwise, charging may stop to
protect the battery pack.)
8
This unit heats up. 0This is not a malfunction. (This unit may
become warm when used for a long time.) -
Warning Indications
Warning Indications Action Page
Warning Indications
RECORDING FAILURE
0Turn off and on this unit again. -
0If the above does not solve the problem, back up
your files and execute “FORMAT BUILT-IN
MEM.” or “FORMAT SD CARD” in the
“COMMON” (basic settings) menu. (All data will
be deleted.)
-
DATA RECORDED FILE IS TOO
SMALL TO BE SAVED
0When time-lapse recording is stopped with the
recorded time less than “0:00:00:17”, the video
will not be saved.
-
ERROR IN BUILT-IN MEMORY!/
MEMORY CARD ERROR!
0Turn off and on this unit again. -
0Remove the AC adapter and battery pack, then
remove and re-insert the SD card. -
0Remove any dirt from the SD card terminals. -
0If the above does not solve the problem, back up
your files and execute “FORMAT BUILT-IN
MEM.” or “FORMAT SD CARD” in the
“COMMON” (basic settings) menu. (All data will
be deleted.)
-
CHECK LENS COVER 0Appears for 5 seconds after power is turned on if
the lens cover is closed or when it is dark. -
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/ 27
Getting StartedRecordingPlaybackCopying
Further
Information