Troubleshooting

If you encounter problems with this unit, check the following before requesting service. 1 Refer to “Trouble” below.

2 Refer to the “Troubleshooting” section in the “Detailed User Guide”.

If you have difficulties operating the unit, refer to the detailed descriptions in the “Detailed User Guide”.

0http://manual.jvc.co.jp/index.html/3Refer to the FAQ of new products on JVC’s website. 0 http://www.jvc.com/

4This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly.

In such a case, reset the unit.A Turn off the power. (Close the LCD monitor.)

BRemove the AC adapter and battery pack from this unit, reattach them, open the LCD monitor and this unit powers on automatically.

5If the above do not solve the problem, consult your nearest JVC dealer or JVC service center.

Trouble

PowerPlayback Recording
TroublePOWER/CHARGE lamp starts blinking when the monitor is closed.Recording cannot be performed.Recording stops automatically.Sound or video is interrupted.

 

Action

Page

 

 

 

 

 

0 The battery pack is being charged.

10

 

 

 

0

Check the A / B button.

15

0

Set to the recording mode by tapping

18

 

the qbutton.

 

 

 

 

0

Turn off this unit, wait for a while, and

-

 

turn it on again. (This unit stops

 

 

automatically to protect the circuit when

 

0

the temperature rises.)

-

Recording stops automatically after 12

 

hours of continuous recording.

 

 

 

 

0

Sometimes playback is interrupted at

-

 

the connecting section between two

 

 

scenes. This is not a malfunction.

 

34 For more information, refer to the Detailed User Guide http://manual.jvc.co.jp/index.html/