JVC GZ-MG275E/EK Select Selected Print, Select the desired Image, Select Print, Select Dpof Print

To Print by Selecting a Still Image

After performing steps 1-2(
pg. 38)

3 Select [SELECTED PRINT].

Select

PRINT THIS IMAGE

SET

Set

4 Select the desired Image.

Select

NUMBER OF PRINTS 1

DATE OFF

PRINT

CANCEL

Set

5 Move the set lever to ¡ / ¢ to select menus and £ / ¤ to select settings.

•[NUMBER OF PRINTS]:

The number of prints can be set from 1 to 99.

•[DATE]:

Set whether to print the date and time.

6 Select [PRINT].

Select

Set

8 To stop printing after printing starts

1)Press down the set lever.

2)Move the set lever to ¡ / ¢ to select [EXECUTE], then press down.

To Print Using the DPOF Settings

If the printer is compatible with DPOF, you can use the DPOF settings. (
pg. 37)

After performing steps 1-2(
pg. 38)

3 Select [DPOF PRINT].

Select

DPOF PRINT

CHECK SETTINGS

PRINT

CANCEL

Set SELECTSET

4 Select [PRINT].

Select

Set

8 To stop printing after printing starts

1)Press down the set lever.

2)Move the set lever to ¡ / ¢ to select [EXECUTE], then press down.

8 To confirm the DPOF setting

In step 4, move the set lever to ¡ / ¢ to select [CHECK SETTINGS], then press down. To return to the previous screen, press FUNCTION.

NOTES

•If the printer is not recognised, disconnect the USB cable, then reconnect it.

•You cannot return to the previous screen while operating Direct print. If you want to redo the operation, remove the USB cable, switch off the camera’s power, and start the operation again from the beginning.

ENGLISH

39