EN 25

Nightscope

 

Spot Exposure Control

 

 

 

The shutter speed is automatically adjusted from 1/2 to 1/30 seconds. It enables recording with little light in dim locations.

After performing “To change to manual recording mode” ( pg. 22)

Selection of a spot metering area enables more precise exposure compensation. You can select one of the three metering areas.

After performing “To change to manual recording mode” ( pg. 22)

16:9

The indicator appears.

To cancel nightscope

Press (NIGHT) so that the indicator

1

16:9

Press twice.

The indicator appears.

2 Select the desired spot metering area

disappears.

NOTE:

It is recommended to use the tripod ( pg. 14) when recording with a slow shutter speed.

frame.

Select

Set

16:9 [0h56m]

Backlight Compensation

Backlight compensation brightens the subject quickly. With a simple operation, dark portions of the subject are brightened by increasing the exposure.

After performing “To change to manual recording mode” ( pg. 22)

To lock the exposure

After you finish configuring the setting, press and hold 49 for more than 2 seconds. The indicator appears.

To cancel spot exposure control

Press ( ) once so that the indicator disappears.

16:9

The indicator appears.

To cancel backlight compensation

Press ( ) twice so that the indicator disappears.