64 EN Warning Indications (Continued)

Indication

Meaning

RECORDING FAILURE

● Performance of recording medium is poor. Use the

 

Cleanup function [CLEAN UP] in the menu.

 

● The writing speed of recording medium is slow, or the

 

recording medium is corrupted. Use an SD card that is

 

guaranteed to operate.

 

● The recording medium was subjected to vibrations or jolts.

 

Be careful not to subject the recording medium to

 

vibrations or jolts.

 

● Appears when the built-in hard disk is full and recording is

 

not possible. Delete unnecessary files.

 

● Appears when the SD card is full and recording is not

 

possible.

 

Replace with new recording medium or delete

 

unnecessary files.

RECORDING MAY NOT BE

● The data may not be recorded on the recording medium

–

CORRECT ON THE MEMORY

correctly. Try recording again.

 

CARD

● Otherwise, clean up the recording medium.

40

 

 

 

 

MEMORY CARD CANNOT BE

● The recording medium cannot be played back correctly. Try

–

PLAYED BACK CORRECTLY

playback again.

 

 

 

 

CANNOT USE IN VIDEO MODE

● The operation is not available in the video mode.

–

 

 

 

DROP DETECTION WORKED

● The drop detection function operated, and the power was

29

AND THE POWER IS TURNED

turned off. The file that was being recorded may have been

53

OFF

saved into the [EXTMOV] folder.

 

 

 

 

 

 

Cleaning the Camera

Before cleaning, turn off the camera and remove the battery pack and AC adapter.

To clean the exterior

Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild soap and wring it out well before wiping. Then wipe again with a dry cloth.

To clean the LCD monitor

Wipe gently with a soft cloth. Be careful not to damage the monitor.

To clean the lens

Wipe gently with lens cleaning paper.

NOTES:

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mould may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth, refer to the cautions for each product.