Other Setting

Using an SD Card

If you want to record to an SD card, the following operations need to be performed.

•Operations are confirmed on the following SD cards. Class 4 or higher compatible SD or SDHC card Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB).

•If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded.

•MultiMediaCards are not supported.

•Cards used to record video on this camcorder cannot be played back on other devices.

•Some card readers (including internal card readers in PCs) may not be able to support SDHC format. If you use an SDHC card for recording and encounter any reading error, the card reader you are using, might be a non-SDHC supported device. Please use the camcorder or other SDHC compatible devices to access the card.

QInsert an SD cardPreparation:Press Power () button to turn off the camcorder.1 Open the SD card cover.2 Firmly insert the card with its clipped edge first.

Clipped Edge

3 Close the SD card cover.LTo remove an SD card Push the SD card once.After the card comes out a little, pull it out.

NOTE

•Insert and remove the SD card only while the power is turned off. Otherwise, data on the card may be corrupted.

•Do not touch the terminal on the reverse side of the label.RChange the recording medium

The camcorder is programmed to record on SLOT A when it is shipped from the factory. You can change the recording medium to

SLOT B.Set [VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to [SLOT A] or [SLOT B].

 

 

MEDIA SETTING

 

 

 

 

 

 

SCENE SELECT

 

 

1

 

 

 

 

FOCUS

SLOT A

@

 

 

 

 

,

ADJUST

SLOTBRIGHTNESSB

@

 

 

 

 

 

SHUTTER SPEED

 

@

 

 

 

SET

QUIT

 

 

 

 

 

 

 

 

 

 

INFORMATION

1.Recording media switches automatically from Slot A to Slot B and vice versa after the card in the selected slot is full.

2.You can select Slot A or Slot B manually as recording media for video and still image respectivety.

SFormat an SD card when using it for the first timeSelect [FORMAT SD CARD] to format the card.

MEDIA SETTING

VIDEO SLOT SELECTION

IMAGE SLOT SELECTION

,FORMAT SD CARD

ERASE ALL DATA

 

SET

QUIT

18