Getting Started

Using the Touch Screen

The LCD monitor of this unit is a touch panel which enables operations by touching the screen.

Icon operation buttons, thumbnails, and menu items are displayed on the touch screen according to the mode in use.

0There are two ways to operate the touch screen, namely “tap” and “drag”. The following are some examples.

A Tap the displayed button (icon) or thumbnail (file) on the touch screen

to make selection.

B Drag the thumbnails on the touch screen to search for the desired file.

Memo :

0The touch screen of this unit is pressure-sensitive. When the touch screen does not respond smoothly, apply slightly more force to your fingertip.

0Tap the buttons (icons) on the touch screen accurately. The buttons may not respond if they are not tapped on the right area.

0Do not press or rub with excessive force.

0Do not operate the touch screen using an object with a sharp tip.

0Pressing two or more places at a time may cause a malfunction.

0Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is misaligned with the touched area. (Adjust by lightly tapping with a corner of an SD card, etc. Do not press with an object with a sharp tip or do not press hard.)

“Adjusting the Touch Panel” (A p. 9)

0You cannot operate the touch screen under water. Lock the screen to prevent operation errors.

“Shooting under Water” (A p. 32)

Locking the Screen (when Shooting Underwater)

Lock the screen before using this unit underwater to prevent operation errors on the touch screen.

0Once the screen is locked, operations on the touch screen are disabled.

0The START/STOP (recording) button and the zoom lever can be used while the screen is locked.

0You can set for both video and still image modes.

oSetting the “SCREEN LOCK”

A Check that the unit is in the recording mode.

B Tap “MENU”.

C Tap “RECORD SETTING”.

D Tap “SCREEN LOCK”.

0The Lbutton appears on the screen.

oTo cancel “SCREEN LOCK”

Tap the Lbutton.

Memo :

0Once “SCREEN LOCK” is set, only the Lbutton on the touch screen can be operated.

0“SCREEN LOCK” cannot be set for the following cases:

-during recording

-when “TIME-LAPSE RECORDING”, “RECORDING EFFECT” or “DATE/ TIME RECORDING” has been set

Adjusting the Touch Panel

Adjusts the response position of the buttons on the touch screen.

1Tap “MENU”.

2Tap “SETUP”.

3Tap “TOUCH SCREEN ADJUST”.

0The touch screen adjustment screen appears. 4 Tap “+”. (3 times in total)

0Keep tapping “+” as its position changes with every tap.

0If areas other than the “+” mark are tapped, errors will occur. Make sure to tap the “+” mark.

5Tap “+” again to confirm the adjusted positions. (3 times in total)

0Keep tapping “+” as its position changes with every tap.

9