Quick Setup

Search CodesCable/Satellite Search Codes Function

1)Slide the first 2-Way Mode Selector switch to CATV.

2)Press the POWER and SET buttons. Hold for at least three seconds and release.

3)Press the POWER button on the remote, and see if the cable or satellite box responds.

4)

If there was a response, press SET. The codes are now set. If there was no response,

 

repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the remote

 

control that came with your equipment.

5)

Press SET to exit.

VCR/DVD Search Codes Function

1)Slide the first 2-way selector switch to “MONITOR” and the other 2-way selector switch to “VCR” or “DVD”.

2)Press the VCR or DVD POWER and SET buttons. Hold for at least three seconds and release.

3)Press the VCR or DVD POWER button, and see if the VCR or DVD responds.

4) If there was a response, press SET. The codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for the DVD player), and there is no response, use the remote control that came with your equipment.

5)Press SET to exit.

28