JVC HD-61G587 manual Monitor OUT PR Monitor OUT

Quick Setup

Connecting to an AV Receiver using your monitor's V1 Smart Input

By connecting your AV Receiver to your monitor's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your monitor. This allows you to free up the other input connections so you can connect more devices to your monitor.

AV Receiver

MONITOR

OUT

Y

PB

PR MONITOR OUT

Monitor Rear Panel

S-VIDEO	VIDEO	R - AUDIO - L
			INPUT-1
	VIDEO	R - AUDIO - L
			INPUT-2
S-VIDEO	VIDEO	R - AUDIO - L
			INPUT-3
OVER
		R - AUDIO - L
			HDMI 1
	Y	Pb	Pr
			INPUT-1
	Y	Pb	Pr
			INPUT-2

1)Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1 on the back of your monitor.

2)Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO INPUT-1 on the back of your monitor.

3)Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y VIDEO INPUT-1 on the back of your monitor.

4)Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the Pb VIDEO INPUT-1 on the back of your monitor.

5)Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the Pr VIDEO INPUT-1 on the back of your monitor.

Note:

•Please refer to your AV Receiver instruction manual for more information on connecting your speakers and other devices like a DVD player.

•Use your AV Receiver's remote to switch to the different devices you have connected.

•Some AV Receivers may not respond when the V1 Smart Input function is turned on, see page 41.

•If you have video connections for each input device connected to your AV Receiver, you should not connect them using both S-Video and Composite connection at the same time when you are using V1 Input as the V1 Smart Input. In this case we recommend using the S-Video connection.

20

Downloaded from www.Manualslib.com manuals search engine