Troubleshooting
PROBLEMS |
| CHECK |
There is no power | • See if the power cord became unplugged. | |
| • Check for a blown fuse or circuit breaker or a power outage. | |
| • | It is possible the fan is stuck or the inside temperature is rising abnormally. |
|
| Consult your dealer. |
|
|
|
The POWER LED | • | It may be a malfunction that the fan is locked or the temperature has increased. |
and LAMP/PROGRAM |
|
|
LED are blinking |
|
|
alternately. |
|
|
|
| |
The POWER LED | • The lamp may not have been installed correctly, or it may be due to a malfunction. | |
and LAMP/PROGRAM | • The lamp door may not be closed correctly. | |
LED are blinking |
|
|
rapidly simultaneously. |
|
|
|
| |
There is no picture | • The antenna could be disconnected. | |
or sound | • The input mode could be set improperly. See page 68. | |
| • The tuner (Auto Tuner Setup) could be set improperly. See page 40. | |
| • The TV station may be having difficulties. Check to see if other stations are working. | |
|
| |
Remote control is not | • Check to see that the batteries are still working and properly installed. | |
operating properly or | • Make sure the remote has a clear sight path to the TV. | |
at all | • Check that the TV/CATV switch is in the proper position. | |
| • You may be too far from the TV. You must be within 23 feet (7 meters). | |
|
| |
You cannot select a | • Make sure the channels have been programmed. See "Channel Summary", page 41. | |
certain channel | • Check to see if the channel is locked. See "Channel Summary - Lock" page 42. | |
|
| |
The power turns off | • Make sure the set did not become unplugged. | |
by itself | • Perhaps the On/Off Timer is set. See page 64. | |
| • Check to see if the Sleep Timer was set. See page 71. | |
|
| |
It does not operate | • This television is operated by a microprocessor. It is possible that external noise or | |
correctly |
| interference is causing the problem. If the television does not function correctly, remove the |
|
| electrical plug from the wall outlet and wait a while before inserting it into the wall outlet |
|
| again and operating the television. |
|
| |
The clock is wrong | • The power was interrupted and the clock was not reset. See page 63. | |
|
| |
The color quality | • Tint and Color may be improperly adjusted. See page 59. | |
is poor | • The Video Status mode may be turned to the wrong setting. See page 70. | |
|
| |
There are lines | • There could be interference from another electrical appliance, such as a computer, | |
across the picture |
| another TV or VCR. Move any such appliances further away from the TV. |
|
| |
The picture is spotted | • There could be interference from a | |
|
| operating nearby. Move the antenna away from the appliance or change to a coaxial |
|
| cable connection which is less prone to interference. |
|
| |
There are double | • A building or passing airplane can reflect the original signal and produce a second, | |
pictures (ghosts) |
| slightly delayed one. Adjust your antenna position. |
|
| |
Picture is snowy | • Your antenna may be damaged, disconnected or turned. Check the antenna | |
(image noise) |
| connection. If the antenna is damaged, replace it. |
|
| |
Screen is 80% black | • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 51. | |
|
| |
Stereo or bilingual | • Make sure the MTS settings are correct. See page 71. | |
programs can't be |
|
|
heard |
|
|
|
| |
The LAMP/PROGRAM | • It may be a malfunction of the internal electrical circuits. | |
LED continues blinking |
|
|
|
|
|
92
