JVC HD-70G886, HD-61Z886, HD-61Z786 manual Following are not malfunctions

Troubleshooting

PROBLEMS	CHECK
There is no sound	• The Center CH Input may be turned on. See page 58.
from the TV's	• The TV Speaker option may be turned off. See page 57.
speaker
Static electricity	• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional	• It is normal for the TV to make crackling sounds when first turned on or off. Unless
crackling sounds	the sound or picture become abnormal, this is fine.
The AUTO DEMO	• The TV recieved a signal from the AV CompuLink
finished automatically	• The On Timer that you programmed has started.
	• The channel that the AUTO DEMO is using is a channel that is blocked by V-Chip.
	• The Auto Shut Off that you programed has occured.

The following are not malfunctions.

•The television may make a creaking sound if the temperature of the room or the temperature inside the television changes. If there is no problem with the screen or sound, then there is no need to worry.

•The lamp may make a noise when it blows, but this is not dangerous.

•The lamp may make a noise when the power is turned on and a picture is displayed on the screen. This noise is caused when the mercury inside the lamp is heated, and is not a malfunction.

•The still parts of a picture may remain on the screen. This is a characteristic of HD-ILA elements and not a malfunction. The picture will disappear over time.

•The operation of this television is not guaranteed below 0ºC. If the power is turned on while the temperature is below 0ºC, the picture may be disturbed. Use the television when the temperature is 0ºC or higher.

•Although the HD-ILA element is manufactured with high-precision technology, please understand that some pixels may be lost or permanently displayed.

•There is a cooling fan built-in to the television. Please understand that this fan will make some noise when the television is on and while cooling.

•Although the picture may be temporarily disturbed and noise may be seen on the screen if the power is turned on immediately after it has been turned off. This is not a malfunction.

93