JVC HR-1080-PRO Power, On/Setup

JVC HR-1080-PRO Video Processor User Manual MKT-0027-UMN-1.002F

5.Return JVC HR-1080-PROto Operate Mode by pushing the On/Setup button on the front panel or the Power button on the IR Remote. This activates the JVC HR-1080-PROoutput circuits. Further adjustments may be made using the JVC HR-1080-PROOSD (On Screen Display).

For projection applications where keystone correction is required, continue with the following steps:

6.If the projector has an AUTOSET or AUTODETECT feature, disable this function. These projector modes may cause image distortion if a keystone-corrected image is applied to the projector input.

7.Select the “Advanced” menu from the JVC HR-1080-PROOSD, then select “Projection”, and “Horizontal and Vertical Keystone” submenus.

8.Using the up/down arrow keys, select in turn each of the image corner sliders and then use the left/right arrow keys to move the corner to the desired location on the screen. Continue adjustments until the projected image matches the target screen geometry.

JVC Inc. Page 13