Editing
You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.
AMake connections
Example: When using this VCR as the playback VCR
This VCR (for playback)
To AUDIO/VIDEO OUT
Audio/video cable (not supplied)
To audio/video input
Another VCR (for recording)
●When using this VCR as the recording VCR, connect this VCR’s audio/video input connectors to the audio/video output connectors on the other VCR. If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.
BLoad cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.
CSelect input mode on recording VCR
Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR);
Select
Press AUX or CH+/– on the Remote. You can select the input mode also by pressing PAUSE[CH], and then FF[CH+] or
DSelect edit mode
Set the edit mode to “ON” for the VCRs if such a mode is equipped.
●On this VCR, set “PICTURE CONTROL” to “EDIT”.
EStart playback
Press PLAY (4) on the playback VCR.
FStart recording
Press REC (7) on the recording VCR.
Specifications
GENERAL
Power requirement | : AC 120 Vd, 60 Hz | |
Power consumption |
|
|
|
| |
Power on | : | 18 W |
Power off | : | 2.0 W |
|
| |
Power on | : | 16 W |
Power off | : | 2.0 W |
Temperature |
|
|
Operating | : | 5°C to 40°C (41°F to 104°F) |
Storage | : | |
Operating position | : | Horizontal only |
Dimensions (W x H x D) : | 360 mm x 94 mm x 247 mm | |
|
| |
Weight | : | 3.0 kg (6.6 lbs) |
Format | : | VHS NTSC standard |
Maximum recording time |
|
|
SP | : | 210 min. with |
EP | : | 630 min. with |
VIDEO/AUDIO
Signal system | : | |
|
| monochrome signal, 525 lines/ |
|
| 60 fields |
Recording/Playback | : | |
system |
| scan system |
: | 45 dB | |
Horizontal resolution | : | 230 lines |
Frequency range |
|
|
|
| |
Normal audio | : 70 Hz to 10,000 Hz | |
: | 20 Hz to 20,000 Hz | |
|
| |
Normal audio | : 70 Hz to 10,000 Hz | |
Input/Output | : | RCA connectors (IN x 2, OUT x 1) |
TUNER
Tuning system | : | |
Channel coverage |
|
|
VHF | : Channels | |
UHF | : Channels | |
CATV | : | 113 Channels |
RF output | : Channel 3 or 4 (switchable; preset to | |
|
| Channel 3 when shipped) 75 ohms, |
|
| unbalanced |
TIMER
Clock reference | : | Quartz |
Program capacity | : |
8programs
Memory backup for timer is not supported.
ACCESSORIES
Provided accessories | : RF cable |
| Infrared remote control unit, |
| “AA” battery x 2 |
Specifications shown are for SP mode unless specified otherwise. E. & O.E. Design and specifications subject to change without notice.