Press MENU.
Press on the Remote SET –/+ to
select “SAP” option.
Press ENTER to select “ON”
position.
Press MENU to return to
normal screen.
Other Functions

BLUE BACK — ON/OFF

When this function is set to “ON”, the TV screen becomes all
blue in the following cases:
When receiving a channel not in use.
When stopping playback.
Press MENU on the remote. Press SET –/+ to select
“NO NOISE BACKGROUND”.
Press ENTER to select “ON”.
Press MENU to return to normal screen.
1
2
3

SEPARATE AUDIO PROGRAM (SAP)

When the VCR is turned on or a channel selection is made,
make certain "SAP" appears on the screen.
This means that the "Separate Audio Program" broadcast-
ing is available.
STEREO SAP
SAP
OR

LISTENING TO SAP

Your VCR is fitted with an SAP broadcast system which
enables you to switch to a SEPARATE AUDIO PROGRAM
when viewing a selected channel.
This function applies only when the program is
broadcast in multi-languages through the SAP broadcast
system.
When a TV is connected with an audio/video cable, turn the
TV and this VCR on, and select the video input mode the TV.
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET ON OFF
ON OFF
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET ON OFF
ON OFF
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND

STEREO RECORDING AND PLAYBACK

When a MTS STEREO broadcast is
received, the STEREO will appear on
the screen and the program can be
viewed or recorded in stereo.
The Hi-Fi STEREO recording proce-
dure is the same as for normal
recordings.
NOTE: When using a CATV system, stereo TV programs
may be transmitted over a mono cable channel. In
this case the word "STEREO" will not appear and the
sound will be in mono.
OUTPUT SELECTION
The VHS Hi-Fi audio system permits high fidelity recording
of MTS STEREO TV broadcasts.
When viewing an MTS STEREO TV program, or playing a
prerecorded VHS Hi-Fi STEREO videotape, press
A.MONITOR to select how the audio will be heard through
the speakers. Normally set to the Hi-Fi STEREO position, this
button can be set to the MONO position if the stereo
broadcast or videotape audio is of poor quality. The "R" and
"L" positions allow the audio from the Right or Left Hi-Fi
channel to be heard over both TV speakers. This button has
no effect when viewing a MONO videotape or TV program.
Each time when you press the button, OUTPUT SELECTION
display appears on the screen for several seconds. Refer to
the chart below.
RECORDING STEREO BROADCASTS
STEREO
NOTES: • When playing back a tape that is not recorded in
Hi-Fi stereo mode, the audio will automatically be
monaural.
• When listening to a VHS Hi-Fi video tape or MTS
broadcast through the VHF/UHF jack (Audio/
Video cord not connected), the sound will be
monaural.
OUTPUT
SELECTION
STEREO
L ch
R ch
MONO
SOUND HEARD ON BOTH
SPEAKERS
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
1
2
3

JVC TV Remote Control

This Remote can control some functions (TV POWER,
INPUT, TV CH –/+ and TV VOL –/+) of a remote
controllable JVC TV without setting.
NOTE:
•It’s not possible to operate a unit not equipped with a
remote sensor.
•This Remote can control a JVC TV only.
4F21901AE 08-Back 16/01/2002, 18:5711