– Connections and Plug&Play Setting –
Antenna or cable
Coaxial cable
Flat feeder |
Matching transformer (not supplied)
AC power cord
Back of VCR |
AC outlet |
To audio/video |
ESet VCR channel
The VCR channel is the channel on which you can watch the picture from the VCR on the TV when only using the RF connection. Press POWER to turn off the VCR, then press STOP/ EJECT (0) on the VCR for more than 5 seconds. “CH3” appears on the display panel. Press CH+/– on the Remote to select “CH3”, “CH4” or
●The VCR channel is preset to “CH3”. Set to “CH4” if CH3 is used for broadcasting in your area.
FFinal preparation for use
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. You can now perform basic playback or basic recording.
Initial Settings
Language Setting
The default setting is “ENGLISH”.
| input connectors |
| |
| Audio/video cable | ||
| (not supplied) | ||
TV | To 75 terminal | RF cable | |
(supplied) | |||
|
| ||
DPerform Plug&Play setup
Plug the AC power cord into an AC outlet. Do not turn on the VCR. The clock and tuner channels will be set automatically. The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels. We call this TV channel the “host channel” and it is a PBS channel in your area.
AAccess Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press rt to move the highlight bar (arrow) to “INITIAL SET”, then press OK or e.
BSelect language
This VCR offers you the language choice to view menus and some messages — in English, Spanish or French. Press rt to move the highlight bar (arrow) to “LANGUAGE”, then press OK or e repeatedly until the desired language is selected.
Press MENU to return to normal screen.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( 
,
), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH GUIDE CHANNEL SET
SELECT WITH ( 
, ) AND (OK)
PRESS (MENU) TO END
ATTENTION:
If you use a cable box, Plug&Play will not function; set the clock and tuner channels separately.
Clock Setting
Perform clock setting only if the clock has not been set correctly by the Plug&Play setting or if you use a cable box.
During Initial Auto Clock Set “Aut” blinks.
During Auto Channel Set
The channel numbers are displayed as they are scanned and set.
Plug&Play Completed
The current time is displayed.
Preparations
AAccess Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press rt to move the highlight bar (arrow) to “INITIAL SET”, then press OK or e.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( 
,
), THEN (OK)
PRESS (MENU) TO END
What to do if Plug&Play setting failed
● If an incorrect time is displayed on the display panel, perform |
the “Semiauto Clock Set” or “Manual Clock Set” procedure. |
● If |
cable is connected correctly. Then turn on and off the VCR; the |
Plug&Play setting will be automatically reactivated. If Plug&Play |
setting is not performed though the antenna cable is connected |
correctly, perform “Manual Clock Set” and “Auto Channel Set” |
or “Manual Channel Set”. |
BAccess Clock Set screen
Press rtto move the highlight bar (arrow) to “CLOCK SET”, then press OK or e.
Setting clock semiautomatically
— Semiauto Clock Set
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH GUIDE CHANNEL SET
SELECT WITH ( 
, ) AND (OK)
PRESS (MENU) TO END
You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. First follow steps 1 to 2 in “Preparations” above, then go to the following steps.
NOTE:
The time set previously will be erased when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.
