JVC HR-A5U To use the VCR while it is in timer recording standby mode, Timer Recording, shown

PRESS (CANCEL) TO CANCEL PRESS (OK) TO CONFIRM PRESS (PROG.) TO END

( , ), THEN ( ) (PROG.) : END

PR START STOP CH DATE

1 8:00P 10:00 12 12/24

2 10:00A 10:45 40 12/25

3 11:30P 1:00 125 12/25

4 9:00P 10:00 10 12/24

5

6

7

8

– Timer Recording –

CPress OK or PROG..

●If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, see “Program overlap warning display”.

DPress TIMER. The VCR turns off automatically and “#” is displayed on the display panel.

To use the VCR while it is in timer recording standby mode

Press TIMER, then press POWER. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode.

Checking, canceling or changing program settings

Program overlap warning display

If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking.

	PR START		STOP	CH	DATE
PROGRAM NOT COMPLETED	1	8:00P	10:00	12	12/24
	2	10:00A	10:45	40	12/25
PROGRAM OVERLAP	3	11:30P	1:00	125	12/25
	4	9:00P	10:00	10	12/24
	5
	6
	7
	8
	(	, ), THEN ( ) (PROG.) : END

Example:

Program 1 (you have just made) and Program 4 overlap each other

ASelect program to modify

ADisengage timer

Press TIMER, then press POWER.

●When “AUTO TIMER” is set to “ON”, you do not have to press

TIMER.

Press rt, then press e.

●You can only select one of the overlapping programs.

●If you do not mind this overlap, press

PROG. to finish the timer program setting. The program starting earlier or program with the lower program number will be

recorded.

BAccess Program Check screen

Press PROG. CHECK.

PR START		STOP	CH	DATE
1	8:00P	10:00	12	12/24
2	10:00A	10:45	40	12/25
3	11:30P	1:00	125	12/25
4
5
6
7

BCancel or change program setting

To cancel a program, press CANCEL when	START
the Program screen you do not want is	9:00PM
	DATE
shown.	12/24/00
	SUN

PROGRAM 4

STOP 10:00PM

CH

10 SP

CAccess Program screen

Press PROG. CHECK again. Each time you press PROG. CHECK, the next program’s Program screen appears.

8
PRESS (CHECK) TO NEXT
	PROGRAM 1
	START	STOP
	8:00 PM	10:00 PM
	DATE	CH
	12/24/00	12	SP

To change a program, press the appropriate button: START+/–,STOP+/–,DATE+/–,CH+/–, and/or SP/EP when the

Program screen on which you want to make changes is shown, then press OK.

● If the overlap is not yet solved, the conflicting programs will be

shown on the Program check screen. Repeat the above steps

PRESS (CANCEL) TO CANCEL

PRESS (CHECK) TO NEXT

DCancel or change program setting

To cancel a program, press CANCEL when the Program screen you do not want is shown.

To change a program, press the appropriate button: START+/–, STOP+/–, DATE+/–, CH+/–, and/or SP/EP when the Program screen on which you want to make changes is shown.

EReturn to normal screen

Press PROG. CHECK repeatedly until no Program screen is shown.

FReengage timer recording standby mode

Press TIMER. The VCR turns off automatically and “#” is displayed on the display panel.

●When “AUTO TIMER” is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.

again.