ADVA
NCED
OPERATIONS
19
Playback Pic- ture Adjustment
0 | 4 |
4 | |
| 3 |
1 | OK | |
2MENU | ||
|
TV PROG
Manual Tracking
Your video recorder is equipped with automatic tracking control. For most tapes this will automatically adjust the tracking to suit the particular tape you are playing. In some circumstances it may be necessary to make manual tracking adjustments. This is usually only associated with old or worn tapes or recordings made on old or worn recorders. If the automatic tracking control fails to operate correctly you will see noise bars across the picture as shown on the left below. To correct this you can override the automatic control and
adjust the tracking manually by pressing the TV PROG buttons.
|
| OVERRIDE AUTOMATIC | |
1 |
| TRACKING | |
| Press | on the remote to engage manual tracking. | |
|
| ADJUST TRACKING | |
2 |
| MANUALLY | |
| Press TV PROG + or – to adjust tracking. | ||
|
| RETURN TO AUTOMATIC | |
3 |
| TRACKING | |
| Press | on the remote to | |
| tracking. |
| |
Picture Control
This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUTO."
| ACCESS MAIN MENU |
|
|
| ||
| SCREEN |
|
|
|
| |
1 Press MENU. |
|
|
|
| ||
| ACCESS MODE SET |
|
|
| ||
| SCREEN |
|
|
|
| |
| Move the highlighted bar (pointer) to "MODE SET" by | |||||
2 pressing %Þ, then press OK or #. |
|
|
| |||
| SELECT PICTURE CONTROL | |||||
| SET MODE |
|
|
|
| |
| Move the highlighted bar | MODE SET |
|
|
| |
| (pointer) to "PICTURE | B. E. S. T. | ON | |||
| CONTROL" by pressing | |||||
| PICTURE CONTROL | AUTO |
| |||
3 %Þ, then press OK or #to | AUTO TIMER | OFF |
| |||
| select the desired mode. | O. S. D. | ON | |||
| DIRECT REC | ON | ||||
| AUTO: Provides | AUTO SP=LP TIMER | OFF | |||
|
| optimised picture | POWER SAVE | OFF | ||
|
| NEXT PAGE |
|
|
| |
|
| benefits of B.E.S.T. | [5°] = |
|
|
|
|
| Picture System. | [MENU] : EXIT |
|
|
|
|
|
|
|
|
| |
|
| Normally select |
|
|
|
|
|
| AUTO. |
|
|
|
|
| EDIT: | Minimizes picture degradation during editing | ||||
|
| (recording and playback). |
|
|
| |
| SOFT: | Reduces image coarseness when viewing | ||||
|
| overplayed tapes containing a lot of noise. | ||||
| SHARP: Clearer, | |||||
|
| images with lots of flat, | ||||
|
| such as cartoons. |
|
|
|
|
NOTES:
●When you select EDIT, SOFT or SHARP, the selected mode will not change until you select again.
●When you select EDIT to dub tapes, be sure to select AUTO after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4 Press MENU.
NOTES:
●When B.E.S.T. is OFF, "PICTURE CONTROL" switches automatically from AUTO to NORM.
●Select EDIT when you are dubbing tapes. Refer to page 35.
NOTE:
When a new tape is inserted, the recorder returns to the automatic tracking mode automatically.
