JVC HR-DD865EK setup guide Remote Control LCD, How To Use

*CABLE/SAT Button enables remote control of connected satellite receiver. ☞ pg. 32, “Remote Control LCD” in the right column

(STANDBY/ON Button — same as button on recorder.

)– –:– – (DISPLAY) Button switches display between clock time, tape remaining time, counter readings and preset position*. ☞ pg. 13

*Preset position is not displayed during playback.

qTV/VCR Button switches connected TV's mode between TV and AV. ☞ pg. 10

wREVIEW Button — same as button on recorder. ☞ pg. 23

e30 SEC Button initiates a 30-second period of fast-motion playback. ☞ pg. 22

rWEEKLY Button enables timer recording of weekly serials. ☞ pg. 15, 17

t Button transmits entered VIDEO Plus+ code to the recorder. ☞ pg. 14

yAUX Button selects recorder's auxiliary input mode. ☞ pg. 33, 34, 35

uä (TIMER) Button — same as button on re- corder. ☞ pg. 15, 17

iAuto Tracking Button () enables/disables auto tracking mode during playback ☞ pg. 19 SP/LP Button selects tape speed. ☞ pg. 12

oOK Button enters selections made in on-screen menus. ☞ pg. 20

pMENU Button accesses Menu screen. ☞ pg. 20 Q TV PROG +/– Button — same as button on

recorder. ☞ pg. 12

W DATE +/– Button inputs date of programme for timer recording. ☞ pg. 16

E Fast Forward [FF] Button fast-forwards tape; initiates high-speed forward search. ☞ pg. 10, 11

R Stop Button — same as button on recorder.

☞pg. 10

TPause Button — same as button on recorder. ☞ pg. 11

Y @ #Button initiates functions such as Index Search ☞ pg. 22, variable-speed search, frame by frame playback. ☞ pg. 11, 24

TV +/–Buttoncontrols volume of connected TV. ☞ pg. 31

63

How To Use

The remote control can operate most of your video recorder's functions, as well as basic functions of TV sets and satellite receivers of JVC and other brands.

(☞ pg. 31, 32)

●Point the remote control toward the sensor window.

●The maximum operating distance of the remote control is about 8 m.

NOTES:

●When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.

●If the remote control doesn't work properly, remove its batteries, wait a short time, replace the batteries and then try again.

Remote Control LCD

The remote control can operate not only the video recorder but also some of your TV and satellite tuner's functions. The LCD indicates which of these (VIDEO, TV or CABLE/SAT) the remote control can currently operate. When you first purchase the remote control, or after you have just replaced the batteries, VIDEO A (A code) is selected.

1To operate your video recorder, first press the VCR button to set the remote control to the Video mode.

To switch remote control's A/B code, refer to page 30.

2To operate your TV, first press the TV button to set the remote control to the TV mode (☞ pg. 31).

3To operate your satellite tuner, first press the CABLE/SAT button to set the remote control to the Satellite tuner mode (☞ pg. 32).

NOTES:

Even if “TV” is displayed on the LCD, the following operations can be performed without switching the mode.

●Basic operations for the recorder

After an operation is completed, “TV” reappears on the LCD.

●Express Timer Programming and VIDEO Plus+ Timer Programming operations

To perform a TV operation again, switch to TV mode first.

●Accessing main menu

To perform a TV operation again, switch to TV mode first.