EN 11
Repeat Playback
Your video recorder can automatically play back the whole tape
50 times repeatedly.
START PLAYBACK
1
Press PLAY.
ACTIVATE REPEAT PLAYBACK
2
Press PLAY and hold for over 5 seconds, then release.
●The Play indicator ( ) on the display panel blinks
slowly.
●The tape plays 50 times automatically, and then
stops.
STOP PLAYBACK
3
Press STOP at any time to stop playback.
NOTE:
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1
Press or (™ or £). “™ 1” or “£ 1” is
displayed on screen and search begins in the corre-
sponding direction.
●To access index codes 2 through 9, press or
repeatedly until the correct index number is displayed.
Ex.: To locate the beginning of B from the current
position, press twice.
To locate the beginning of D from the current
position, press once.
●When the specified index code is located, playback
begins automatically.
Current position
Index number
%
fi
%
fi
fi%
AB C D E F
–2 –1 1 2 3
%
%
£ 2
SKIP OVER UNWANTED
SECTIONS
1
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search, press PLAY.
Skip Search
Next Function Memory
You can set your recorder's power to go off automatically after
the tape is fully rewound. Before starting, make sure the
recorder is in the Stop mode.
For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press within 2 seconds.