JVC HR-J261MS, HR-J267MS SET TAPE SPEED, ENGAGE RECORDER'S TIMER MODE

EN 21
SET TAPE SPEED
6
Press SP/LP/EP ( ) to set the tape speed.
RETURN TO NORMAL
SCREEN
7
After confirming all information is correct, press PROG
or OK. "PROGRAM COMPLETED" appears on the
screen for about 5 seconds, then normal screen
appears.
●Repeat steps 1 – 7 for each additional programme.
ENGAGE RECORDER'S
TIMER MODE
8
Press TIMER. The recorder turns off automatically and
"‰" appears on the display panel.
●To disengage the timer, press TIMER again.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 7, press WEEKLY (NUMBER
key "9") for weekly serials or DAILY (NUMBER key "8") for daily
serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears on
the screen. Pressing the button again makes the corresponding
indication disappear.
NOTE:
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes ( Z pg. 22).
SP/LP/EP
123
4
0
6
78
5
9
1
4
3
2
TIMER
WEEKLY
DAILY
OK
SP/LP/EP
PROG