Edit From A
Camcorder Or
Another Video
Recorder
1 2 3
4 5 6
7 8 9
0 4
NUMBER "0"
2
TV PROG
3
Recording deck | Your recorder |
VIDEO IN | AUDIO IN |
AV Cable (not provided)
Source player | VIDEO OUT |
Camcorder | AUDIO OUT |
or
Another video recorder
Source player
E
N
25
You can use a camcorder or another video recorder as the source player and your video recorder as the recording deck.
1 | MAKE CONNECTIONS |
Connect the AUDIO/VIDEO OUT connectors on the | |
camcorder or another video recorder to the front panel | |
AUDIO/VIDEO input connectors on the recording deck. |
| SET RECORDER'S INPUT |
| MODE |
| Press NUMBER key "0" and/or TV PROG so that |
2 appears on the display panel. | |
| SELECT "EDIT" FOR PICTURE |
3 | CONTROL SET MODE |
Follow the "Picture Control" section on page 15, then | |
NOTE:select "EDIT." | |
| When you select "EDIT" to dub tapes, be sure to select |
| "AUTO" (or "NORM" when the B.E.S.T. function is set to |
| "OFF") after you finish dubbing the tapes. |
|
|
| START SOURCE PLAYER |
4 Engage its Play mode. | |
| START RECORDING DECK |
5 Engage its Record mode. | |
IMPORTANT:
●To edit, both the player and the recorder must be of the same colour system. Press your recorder's COLOUR SYSTEM button to select the appropriate colour system.
●PAL, SECAM and NTSC camcorders or video recorders can be used as a player for editing.
●For more information on
