JVC HR-J341EM Edit To Or From Another Video Recorder, Make Connections, Start Source Player

20EN

EDITING

Edit To Or

From Another

Video

Recorder

1 2 3

4 5 6

7/ 8 9

0 4

You can use your video recorder as the source player or the recording deck.

MAKE CONNECTIONS

1 Connect the player’s AUDIO/VIDEO OUT connector to the recorder’s AUDIO/VIDEO IN connector.

SET RECORDING DECK’S INPUT MODE

2 Set to AUX. With this video recorder, press NUMBER Key "0" or TV PROG. "AU" will appear instead of a channel number.

START SOURCE PLAYER

3 Engage its Play mode.

START RECORDING DECK

4 Engage its Record mode.

2			NOTES:
NUMBER "0"
		TV PROG	● All necessary cables can be obtained from your dealer.
			● NTSC tapes being played back in the NTSC [PAL mode (☞
1	3	Á	p. 23) cannot be dubbed to another recorder.
			● When you dub an NTSC tape using your recorder as the
¦	7	8	playback deck, select NTSC 3.58 (or NTSC 4.43) with the
			COLOUR SYSTEM button. (☞ p. 22)
1	4	¢
3			IMPORTANT:
			● To edit, both the player and the recorder must be of the
			same colour system. Press your recorder's COLOUR
			SYSTEM button to select the appropriate colour system.
			● For more information on multi-system compatibility,
			☞ pg. 22.

TV Receiver	Player	Your recorder	Recorder	Your recorder	TV Receiver
VIDEO		AV Cable		AV Cable	VIDEO
CHANNEL		(not provided)		(not provided)	CHANNEL
RF Cable (provided)					RF Cable
					(provided)
		Another recorder	Another recorder
	Recorder		Player