JVC HR-J443U On-Screen Timer Programming, Access Program SET, Information, EN Timer Recording

28ENTIMERRECORDING

On-Screen

Timer

Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

2 2

q 5/8 6

MENU	CH
	OK

	1	2	3
	4	5	6	NUMBER
	7	8	9	NUMBER "9"
		0
NUMBER	"8"
				CH
1		3		Á
¦		7	8

4¢

MENU	SHUTTLE PLUS
OK

You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 7 or 9).

1		LOAD A CASSETTE
		Make sure the record safety tab is intact. If not, cover
		the hole with adhesive tape, then load.
		● The VCR comes on, and the counter is reset,
		automatically.
		ACCESS ON-SCREEN
		MENU
2 Press MENU.
		ACCESS PROGRAM SET
3		SCREEN
		Make sure the highlight bar (arrow) is on "PROGRAM
		SET", then press OK.
4		SELECT PROGRAM NUMBER
		Press the appropriate
				PROGRAM 1
		NUMBER keys or CH5°or
		SHUTTLE PLUS %Þto	DATE		– –/– –
			START		– –:– – AM
		select a vacant program	STOP		– –:– – AM
		number, then press OK. The
			CHANNEL		– – SP
		first time you set the timer
		programming function, all	PRESS NUMBER KEY (O–9)
		the program numbers will	OR (5,°), THEN (OK)
			PRESS (MENU) TO END
		be blank; in this case just
		press OK when the Program Set screen appears.
		SET PROGRAM
5		INFORMATION
		Press the appropriate NUMBER keys to set the date,
	start/stop time and channel number. Press CH5° or
	SHUTTLE PLUS %Þ to set AM/PM and tape speed (SP
	or EP). Press OK after AM/PM, channel number and
	tape speed settings.

●Any information comprised of 1 digit (except the channel number) should have a "0" entered before it.

●It is possible to set all information using the CH5° or SHUTTLE PLUS %Þ button.

(In this case, press OK after each setting.) Do not use the CH ° or SHUTTLE PLUS Þ button to set the date.

●At the Program Set screen, the setting that can be set blinks. When setting of a highlighted item is completed, the highlight bar moves down by 1 line to the next item.

NOTE:

If you are using a cable box, enter the cable box channel, not the channel to be recorded. The channel to be recorded must be selected on the cable box. (The cable box channel is the VCR's channel that displays the channels received by the cable box.)

**You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key “8” (DAILY) or “9” (WEEKLY). Either "DAILY" or "WEEKLY" appears. Press again and "DAILY" or "WEEKLY" disappears. For weekly recording, the desired date for the day of the week must be entered.