5

STEP

2

INSTALLATION

CONNECT VIDEO RECORDER TO TV

Place the recorder on a stable, flat surface.

Back of TV

Aerial connector

21-pin AV input connector (SCART)

Mains Power Cord

RF Cable (provided)

21-pin SCART Cable (not provided)

TV Aerial Cable

(not provided)

Make this

connection if your TV has a

21-pin AV input connector (SCART) in order to reduce the possibility of interference. And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes.

 

 

ENTREE

 

 

ANT. IN

AV2 ENTREE/DECODEUR

AV1 ENTREE/SORTIE

ANTENNE

IN/DECODER

IN/OUT

SORTIE

 

 

OUT

Back of Recorder

Mains outlet

RF CONNECTION

To Connect To A TV With NO 21-pin AV input connector (SCART) . . .

1– Disconnect the TV aerial cable from the TV.

2– Connect the TV aerial cable to the ANT. IN jack on the rear panel of the recorder.

3– Connect the provided RF cable between the RF. OUT jack on the rear panel of the recorder and the TV’s aerial connector.

AV CONNECTION

To Connect To A TV With 21-pin AV input connector (SCART) . . .

1– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

2– Connect an optional SCART cable between the AV1 IN/OUT connector on the rear panel of the recorder and the TV’s 21-pin AV input connector (SCART).

ATTENTION

Do NOT Plug the mains power cord into a mains outlet until all connections are completed.

Do NOT press the button on the recorder or on the remote control to turn on the recorder's power before you start the Auto Set Up procedure described on page 6.

AFTER YOU FINISH THIS STEP

Go to Step 3 – AUTO SET UP

Page 5
Image 5
JVC HR-J265ES, HR-J465EK, HR-J265EK, HR-J260EK setup guide Back of TV, Back of Recorder, Mains outlet