JVC HR-J658EE Tape-To-Tape Editing, Recorded tape Your recorder, Playback equipment, Dubbed tape

EN27

Playback

This recorder can play back all 3 types of recorded tape.

Recorded tape		Your recorder
PAL	Playback circuit
	PAL			Multi-system receiver
MESECAM				PAL
	MESECAM	Built-in		(B/G, D/K, I)
			RF OUT
		RFconverter
NTSC	NTSC[PAL	K, I, G
	NTSC 3.58 MHz
				Multi-system monitor
	Manual switching
Manual				PAL
switching
	NTSC 4.43 MHz			SECAM
			VIDEO OUT
				NTSC 3.58
			AUDIO OUT	NTSC 4.43

NOTES:

When viewing NTSC tapes on a PAL TV set:

●The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the part of the video recorder nor the TV.

●The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

ATTENTION:

When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system select switch of the TV is adjusted to the AUTO position. In such a case, set the TV's colour system select switch to the appropri- ate position which corresponds to the TV system you have selected at the TV System Select screen.

Tape-To-Tape Editing

There are 4 different types of recorded tape, depending on the signal recorded.

Recorded tape

PAL

MESECAM

SECAM

NTSC

Playback equipment

PAL

MESECAM

SECAM

NTSC 3.58 MHz

NTSC 4.43 MHz

Your recorder

PAL

MESECAM

Recording circuit

NTSC 3.58 MHz

NTSC 4.43 MHz

Dubbed tape

PAL

MESECAM

NTSC