BSelect your country
Press rt to place the pointer next to your country, then press OK or e.
DConnect Satellite Controller to recorder
Connect the Satellite Controller to the SAT CONTROL connector on the rear panel.
CSelect language
Press rt to place the pointer next to the desired language.
●You do not have to press OK; pressing OK enters AUTO
DReturn to normal screen
Press MENU.
T-V Link Functions
When you connect the recorder to your TV via a fully-wired
*Compatible with TVs offering
NexTView Link
You can download the EPG (Electronic Programme Guide) information from your TV for
TV Auto Power On
The TV will turn on and be set to its AV mode automatically whenever you play a tape.
VCR Auto Standby
You can use your TV’s remote control to turn off the recorder.
Direct Rec
You can easily start recording the programme that you are watching on your TV. When you use this function, set “DIRECT REC” to “ON”. ( 12)
Satellite Receiver Control Set
When you use an optional Satellite Controller and perform the following settings, you can control your satellite receiver’s channel for timer recording. Approximately 20 seconds before the timer recording starts, the recorder sets its input mode to
NOTE:
The Satellite Controller does not function for 24 Hour Express Timer Programming.
ASituate Satellite Controller
Place the Satellite Controller so that the path between its transmitter and the satellite receiver’s remote sensor is unobstructed.
BAttach Satellite Controller
Fix securely using the adhesive strip attached on the back of the Satellite Controller.
Satellite receiver
| Satellite receiver |
Transmitter | To VCR |
| |
| connector |
Satellite Controller | |
(not provided) | (not provided) |
| To |
| DECODER |
| Your recorder |
To SAT CONTROL
ETurn on satellite receiver
Turn on the satellite receiver’s power.
FAccess Main Menu screen, then Initial Set screen
Press MENU. Press rt to place the pointer next to “INITIAL SET”, then press OK or e.
GAccess Sat Control Set screen
Press rt to place the pointer next to “SAT CONTROL SET”, then press OK or e.
H Enter satellite receiver’s brand
Press the appropriate number keys to enter the brand code from the following list, then press OK.
●If the code you entered is invalid, the code field will be reset. Enter the correct
code again.
BRAND NAME | CODE | BRAND NAME | CODE |
|
|
|
|
JVC | 73 | MASPRO | 70 |
AMSTRAD | 60, 61, 62, 63, 92 | NOKIA | 87, 94 |
CANAL | 81 | PACE | 65, 67, 74, 86, 92 |
SATELLITE |
| PANASONIC | 74, 92 |
CANAL + | 81 | PHILIPS | 66, 84, 101 |
85 | RADIX | 78 | |
ECHOSTAR | 82 | RFT | 69 |
(VIA DIGITAL) |
| SABA | 97 |
FINLUX | 68 | SAGEM | 83, 90 |
FORCE | 89 | SALORA | 68 |
GALAXIS | 88 | SAMSUNG | 83 |
GRUNDIG | 64, 65, 102 | SIEMENS | 64 |
HIRSCHMANN | 64, 78, 99 | SKYMASTER | 69, 98 |
HUMAX | 88 | TECHNISAT | 66, 100 |
ITT NOKIA | 68 | THOMSON | 97 |
KATHREIN | 70, 71, 96 | TPS | 83 |
LUXOR | 68 | TRIAX | 91 |
MASCOM | 93 | WISI | 64 |
|
|
|
|
ISelect satellite receiver’s channel for testing
Press the appropriate number keys to enter the channel position on the satellite receiver, then press OK. The recorder enters the test mode.
Satellite Controller
Your recorder(not provided) (suggested locations)
CMake connections
Connect the recorder’s
J Check result of the test
If the satellite receiver’s channel number has been changed to the same one as you set in step 9 …
Press rt to place the pointer next to “CHANGED TO …”, then press OK or e to finish the Sat Control Set mode.
If the satellite receiver’s channel number has not been changed correctly …
Press rt to place the pointer next to “NOT CHANGED”, then press OK or e. Then perform the procedure again from step 8.
NOTE:
The Satellite Controller may not function properly with some types of satellite receiver.
— 5 —
